Product & Services
Oilfield &
Performance-driven chemicals for drilling, maintenance, and cleaning, including drilling fluids, degreasers, lubricants, and cleaning agents.
DRILLING CHEMICALS
Specialized chemical formulations engineered to enhance drilling efficiency, maintain wellbore stability, and ensure operational reliability in oilfield and marine applications.
Viscosifiers and Fluid Loss Additives
Additives designed to regulate drilling mud viscosity, filtration control, and stabilize wellbore conditions.
- Types: Bentonite • CMC (Carboxymethyl Cellulose) • PAC (Polyanionic Cellulose) • HEC (Hydroxyethyl Cellulose) • Xanthan Gum • Guar Gum • Lignosulphonates
- Forms: Powdered • Granular • Liquid suspensions
-
Properties:
- Viscosity Range: 15–60 cP (depending on polymer)
- Fluid Loss Control: ≤10 mL filtrate in 30 min (API standard)
- Thermal Stability: Up to 150–180°C (depending on additive)
- pH Range: 7–11 for optimal performance
- Standards: API 13A compliant (for bentonite and polymers)
- Features: Rapid hydration • Low-shear viscosity buildup • High-temperature tolerance • Environmentally compatible variants
- Applications: Oilfield drilling mud conditioning • Marine offshore wellbore stabilization • Industrial slurry systems • Geothermal drilling fluids
Weighting Agents
Compounds to increase mud density, balancing formation pressures and preventing well blowouts.
- Types: Sodium Formate • Potassium Formate • Potassium Chloride • Potassium Sulphate • Barite
- Forms: Crystalline solids • Powdered agents • Brine solutions
-
Properties:
- Density Range: Up to 2.4 SG (formate brines) • Up to 4.2 SG (barite)
- Solubility: High (formates) • Insoluble (barite, used as suspension)
- Particle Size: <75 µm (barite for API standard)
- Thermal Stability: >200°C (formate brines)
- Features: Non-damaging to reservoirs (formates) • High-density control • Compatible with water/oil-based muds • Corrosion-reducing brines
- Applications: High-pressure deep-water drilling • Offshore well control • Oilfield HPHT formations • Industrial brine systems
Corrosion, Biocide & Acid Treatment Chemicals
Chemicals to control microbial growth, minimize corrosion, and stimulate formations via acid treatment.
- Types: THPS (Tetrakis Hydroxymethyl Phosphonium Sulfate) • Hydrochloric Acid • Acetic Acid Glacial • Phosphoric Acid
- Forms: Liquid solutions • Concentrated acids • Blended inhibitors
-
Properties:
- Corrosion Inhibition Efficiency: Up to 95% (THPS + inhibitors)
- Biocidal Activity: Effective at 100–200 ppm dosage (THPS)
- Acid Strength: HCl (28–37%) • Acetic (≥99.5%) • Phosphoric (85%)
- pH: <2 for acid systems
- Features: Fast-acting biocides • High solubility • Non-oxidizing formulations • Effective scale removal • Strong mineral dissolution
- Applications: Oilfield acidizing (matrix & fracture stimulation) • Offshore microbial control in muds • Marine corrosion prevention in pipelines • Industrial water treatment
MAINTENANCE CHEMICALS
Reliable chemical solutions engineered to ensure vessel efficiency, protect critical equipment, and extend service life in oilfield, marine, and industrial operations.
Cleaning & Degreasing Chemicals
Formulations designed to remove oil, grease, sludge, and carbon deposits from machinery, decks, tanks, and confined spaces for safe and efficient operation.
- Types: Solvent-based degreasers • Water-based degreasers • Tank cleaners • Engine room cleaners
- Forms: Liquid concentrates • Aerosols • Gel cleaners • Foam sprays
-
Properties:
- pH Range: Neutral (6–8) to Alkaline (10–13) depending on application
- Flash Point: >60°C (low-VOC solvent blends)
- Cleaning Efficiency: Removes >95% oil/grease residues in <30 min soak (ASTM D482)
- Biodegradability: ≥80% (per OECD 301)
- Standards: MARPOL Annex V compliant • IMO MEPC.1/Circ.590 listed
- Features: Non-flammable options • Low-toxicity • Fast-acting • Compatible with seawater dilution • Non-corrosive to metals
- Applications: Marine engine rooms • Offshore drilling rigs • Oilfield tank cleaning • Industrial floor/deck degreasing • Shipyard maintenance
Lubricants & Protective Oils
Specialty lubricants that minimize friction, reduce wear, and protect equipment under heavy-duty marine and oilfield operating conditions.
- Types: Mineral-based lubricants • Synthetic oils • Multipurpose greases • Anti-wear hydraulic oils
- Forms: Oils • Greases • Aerosol sprays • Pastes
-
Properties:
- Viscosity Range: ISO VG 32–680 (for oils)
- Dropping Point (Grease): >180°C (lithium-based)
- Load Carrying Capacity: >250 kgf (four-ball EP test, ASTM D2596)
- Corrosion Protection: Passes ASTM D665 (saltwater test)
- Standards: ISO 6743 • API/ACEA compliant
- Features: High load-carrying capacity • Oxidation- and water-resistant • Long re-lubrication intervals • Wide temperature stability (–30°C to +180°C)
- Applications: Marine engines and winches • Offshore drilling equipment • Oilfield rigs and bearings • Industrial conveyors and pumps • Ship deck machinery
Corrosion Control & Protective Coatings
Chemicals and coatings developed to prevent, inhibit, and repair corrosion damage in harsh saltwater and offshore environments.
- Types: Rust removers • Corrosion inhibitors • Epoxy coatings • Zinc-rich primers • Anti-fouling paints
- Forms: Liquids • Aerosol sprays • Powder coatings • 2K (two-component) paints
-
Properties:
- Salt Spray Resistance: >1,000 hours (per ASTM B117)
- Dry Film Thickness (DFT): 100–250 µm (epoxy coatings)
- Adhesion Strength: >5 MPa (pull-off test per ISO 4624)
- Operating Temperature: –20°C to +200°C (depending on coating type)
- Standards: NACE RP0175 • ISO 12944 compliant
- Features: Long-term corrosion resistance • Fast curing • High mechanical strength • UV- and chemical-resistant finishes • Compatible with steel and alloys
- Applications: Marine hulls and decks • Offshore platforms • Oilfield pipelines and tanks • Shipyard structural components • Industrial marine equipment
INDUSTRIAL CLEANING CHEMICALS
High-strength cleaning and disinfecting agents that remove grease, scale, and microbial contaminants, ensuring safe and efficient oilfield and marine operations.
Alkaline Cleaning Agents
Powerful cleaners for degreasing, sludge removal, and carbon deposit cleaning in demanding industrial and marine settings.
- Types: Caustic Soda (NaOH) • Soda Ash (Na₂CO₃) • Trisodium Phosphate (TSP) • Potash (K₂CO₃)
- Forms: Powdered solids • Liquid concentrates • Granular forms
-
Properties:
- pH Range: 11–14 (high alkalinity)
- Solubility: 100–1,000 g/L (varies by compound)
- Operating Temp: Effective up to 90–95°C in aqueous cleaning
- Degreasing Efficiency: >95% removal of oil/grease residues (ASTM D482)
- Standards: MARPOL-compliant, IMO-approved tank cleaning chemicals
- Features: Fast-acting degreasing • Effective on hydrocarbon residues • High solubility in seawater • Cost-effective bulk cleaning agent
- Applications: Tank cleaning • Machinery degreasing • Deck wash-down • Boiler cleaning • Marine engine room maintenance
Acidic Cleaning Agents
Critical for removing scale, rust, and mineral deposits from pipelines, boilers, and heat exchangers.
- Types: Acetic Acid • Sulphamic Acid • Hydrochloric Acid (HCl) • Phosphoric Acid
- Forms: Liquid concentrates • Powdered solids • Blended formulations
-
Properties:
- pH Range: <2 (strong acidity)
- Acid Strength: HCl (28–37%) • Acetic (≥99.5%) • Phosphoric (85%) • Sulphamic (95–99%)
- Scale Dissolution Efficiency: >90% carbonate removal in <1 hr (lab test)
- Corrosion Rate: Controlled with inhibitors to <0.05 mm/year (NACE standard)
- Features: Rapid descaling • Effective rust removal • Compatible with corrosion inhibitors • Suitable for hot and cold circulation cleaning
- Applications: Pipeline descaling • Boiler water treatment • Rust cleaning • Condenser and heat exchanger maintenance • Chemical pickling of metals
Oxidizing & Disinfecting Agents
Chemicals designed for sterilization, microbial control, and odor management in industrial and marine water systems.
- Types: Potassium Permanganate (KMnO₄) • Sodium Dichloroisocyanurate (SDIC) • Chlorine Tablets • Hydrogen Peroxide (H₂O₂)
- Forms: Solid tablets • Crystalline powders • Liquid solutions
-
Properties:
- Oxidizing Power: High (redox potential >1.5 V for KMnO₄, >1.8 V for H₂O₂)
- Available Chlorine Content: 56–65% (SDIC, tablets)
- Disinfection Efficacy: 99.9% microbial kill at 2–5 ppm (WHO standards)
- Stability: Solid tablets stable >12 months in sealed storage
- Features: Broad-spectrum microbial control • Odor elimination • Easy-to-dose formulations • Effective in seawater and freshwater
- Applications: Potable water disinfection • Ballast water treatment • Cooling tower microbial control • Offshore rig sanitation • Marine HVAC systems